NSN 5306-01-348-3555
Coaxial Connector
Between 1.056 inches and 1.086 inches fastener length, spline drive shear head head style, between 0.240 inches and 0.260 inches head height, hole diameter: between 0.032 inches and 0.042 inches .
Manufacturer part number X384-4H10 for national stock number 5306013483555.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-348-3555.
-
MPN or Model
X384-4H10
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.446 inches -
Fastener Length
Between 1.056 inches and 1.086 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.240 inches and 0.260 inches -
Hole Diameter
Between 0.032 inches and 0.042 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
Between 0.460 inches and 0.470 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hole Configuration Style
Round longitudinal hole -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2520 MPN LS15266V3-1Machine Screw
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-01-365-0404 MPN BACB30LK3-13Close Tolerance Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-512-8356 MPN 3M1170D3-8AFClose Tolerance Screw
- 5305-01-660-9541 MPN LD111-0046-2309Close Tolerance Screw
- 5306-01-043-5724 MPN VEP220121-6F65Shear Bolt
- 5306-01-044-0737 MPN VAL22034-7FS18Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-348-3555 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| X384-4H10 | Huck International, Inc. |
| 03A099-4H10 | Northrop Grumman Systems Corporation |
| VCG0016-4H10 | Valley-todeco, Inc. |
| AIC1654-4H10 | Sps Technologies, Llc |
| 123710-4H10 | Sps Technologies, Llc |
| SLB187-4H10 | Space-lok, Inc. |
| DF33004-4H10 | Huck International, Inc. |
| SII1182-4H10 | Sonic Industries Inc. |
| PBF1421-4H10 | Sps Technologies, Llc |
| VS3318-4H10 | Alcoa Global Fasteners, Inc. |
| MB210-4H10 | Hi-shear Corporation |
| 03A099-4H10 | Northrop Grumman Systems Corporation |
| MB210-4H10 | Lisi Aerospace Canada Corp |
| VS3318-4H10 | Voi-shan/chatsworth |
| DF33004-4H10 | Huck Intl Inc |
| X384-4H10 | Huck Intl Inc |
Stock Check
