NSN 5306-01-348-7808
Close Tolerance Hex Head Bolt
Between 1.250 inches and 1.270 inches fastener length, double hexagon extended washer head style, between 0.240 inches and 0.250 inches head height, width between flats: between 0.235 inches and 0.250 inches .
Manufacturer part number MS21297H04008 for national stock number 5306013487808.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-348-7808.
-
MPN or Model
MS21297H04008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.495 inches -
Fastener Length
Between 1.250 inches and 1.270 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.240 inches and 0.250 inches -
Width Between Flats
Between 0.235 inches and 0.250 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.249 inches and 0.250 inches -
End Application
Pacer dawn -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-089-6878 MPN MS3116E10-6PElectrical Plug Connector
- 5935-00-172-7839 MPN MS27473T20A39SElectrical Plug Connector
- 5935-00-173-1355 MPN MS3120E8-33SElectrical Receptacle Connector
- 5935-00-201-2482 MPN MS3102A36-7SElectrical Receptacle Connector
- 5935-00-232-3800 MPN MS3108A24-7SElectrical Plug Connector
- 5935-00-236-8269 MPN MS3102A20-17PElectrical Receptacle Connector
- 5935-00-261-6759 MPN MS27497T22B35PAElectrical Receptacle Connector
- 5950-00-420-3615 MPN MS90537-66Radio Frequency Coil
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-348-7808 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297H04008 | Military Standards |
Stock Check
- NE: 63