NSN 5306-01-349-6470
Coaxial Connector
1.315 inches fastener length, double hexagon w/hole head style, 0.265 inches head height, width between flats: 0.250 inches .
Manufacturer part number MS21250-03-014 for national stock number 5306013496470.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-349-6470.
-
MPN or Model
MS21250-03-014
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.430 inches and 0.450 inches -
Fastener Length
1.315 inches -
Head Style
Double hexagon w/hole -
Head Height
0.265 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
Between 0.340 inches and 0.350 inches -
Extended Washer Thickness
0.055 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-253-5011 MPN NAS1650R22B55SXElectrical Receptacle Connector
- 5935-00-810-7063 MPN NAS715-23CElectrical Receptacle Connector
- 5940-01-361-8073 MPN NAS1746-6Conductor Splice
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5935-01-443-8103 MPN NAS1692G10T5PNElectrical Receptacle Connector
- 5305-00-008-2070 MPN NAS1133E12Close Tolerance Screw
- 5305-00-021-7101 MPN MS21295-41Socket Head Cap Screw
- 5305-00-058-3790 MPN NAS514P632-9Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-349-6470 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-03-014 | National Aerospace Standards |
MS21250-03-014 | Military Standards |