NSN 5306-01-350-2899
Coaxial Connector
2.997 inches fastener length, double hexagon extended washer head style, 0.557 inches head height, width between flats: 0.625 inches .
Manufacturer part number MS21250-09034 for national stock number 5306013502899.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-350-2899.
-
MPN or Model
MS21250-09034
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.852 inches -
Fastener Length
2.997 inches -
Head Style
Double hexagon extended washer -
Head Height
0.557 inches -
Width Between Flats
0.625 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
0.133 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-005-2932 MPN MS24264G22T55P6Electrical Receptacle Connector
- 5935-00-042-3665 MPN MS3103-12S-3PElectrical Receptacle Connector
- 5940-00-050-2308 MPN M5355431-3Lug Terminal
- 5950-00-075-9144 MPN MS90538-12Radio Frequency Coil
- 5905-00-106-9345 MPN MS35043-24Composition Fixed Resistor
- 5905-00-114-5388 MPN MS35043-47Composition Fixed Resistor
- 5935-00-159-7175 MPN MS27499E14B18SElectrical Receptacle Connector
- 5935-00-162-8649 MPN MS27473T12B98SElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-350-2899 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-09034 | Military Standards |
MS21250-09034 | Military Standards |
MS21250-09034 | Military Standards |
MS21250-09034 | Military Standards |
MS21250-09034 | Military Standards |
MS21250-09034 | Military Standards |
MS21250-09034 | Military Standards |
MS21250-09034 | Military Standards |