NSN 5306-01-351-5172
Coaxial Connector
Between 2.388 inches and 2.418 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6207-30 for national stock number 5306013515172.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-351-5172.
-
MPN or Model
NAS6207-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 2.388 inches and 2.418 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.437 inches -
Grip Length
1.875 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams6322 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6207 professional/industrial association standard
More from these suppliers
- 5930-00-681-4897 MPN MS25224-2Switch Guard
- 5940-01-413-3014 MPN NAS1063B227-230Terminal Board Marker Strip
- 5935-01-646-7803 MPN NASM21250-08022Electrical Receptacle Connector
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-007-0278 MPN NAS1100E00-8Machine Screw
- 5305-00-007-6182 MPN NAS1100E04-10PMachine Screw
- 5305-00-052-7474 MPN MS24627-70Tapping Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-351-5172 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6207-30 | National Aerospace Standards |