NSN 5306-01-352-0617
Coaxial Connector
Between 1.720 inches and 1.750 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS1958-16 for national stock number 5306013520617.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-352-0617.
-
MPN or Model
NAS1958-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.710 inches and 0.760 inches -
Fastener Length
Between 1.720 inches and 1.750 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp e4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-442-4218 MPN NAS1063A2-TB107DCTerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-005-8227 MPN MS35307-302Hexagon Head Cap Screw
- 5305-00-008-9119 MPN NAS1190E04T22LSocket Head Cap Screw
- 5305-00-068-8431 MPN MS16996-13Socket Head Cap Screw
- 5305-00-078-5665 MPN MS35199-26Machine Screw
- 5305-00-089-0269 MPN NAS1352-04-6PSocket Head Cap Screw
- 5305-00-114-1977 MPN MS27039-5-11Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-352-0617 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1958-16 | National Aerospace Standards |