NSN 5306-01-352-3305
Coaxial Connector
2.997 inches fastener length, spline extended washer head style, between 0.495 inches and 0.515 inches head height, extended washer diameter: between 1.037 inches and 1.047 inches .
Manufacturer part number 80994-9-32 for national stock number 5306013523305.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-352-3305.
-
MPN or Model
80994-9-32
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.997 inches -
Fastener Length
2.997 inches -
Head Style
Spline extended washer -
Head Height
Between 0.495 inches and 0.515 inches -
Extended Washer Diameter
Between 1.037 inches and 1.047 inches -
Extended Washer Thickness
Between 0.071 inches and 0.091 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Head Minor Diameter
Between 0.610 inches and 0.625 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-3211 MPN LS15264V04-13Machine Screw
- 5305-01-041-9629 MPN BACB30LH3-7Close Tolerance Screw
- 5305-01-090-6335 MPN BACB30LR3-17Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-600-3668 MPN 3M1275E5D11AMachine Screw
- 5306-00-321-2294 MPN VAL23033-6-10Shear Bolt
- 5306-00-338-4104 MPN GB511C-8-29Shear Bolt
- 5306-00-402-8862 MPN MS21250-06074Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-352-3305 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
80994-9-32 | Sps Technologies, Llc |
3408-9-32 | Alcoa Global Fasteners, Inc. |
VCG0027-9-32 | Valley-todeco, Inc. |
AIC871-9-32 | Sps Technologies, Llc |
PBF1535-9-32 | Sps Technologies, Llc |
3D0013-9-32 | Boeing Company, The |