NSN 5306-01-352-5049
Coaxial Connector
2.491 inches fastener length, double hexagon extended washer head style, 0.435 inches head height, width between flats: 0.5000 inches .
Manufacturer part number MS21250H07028 for national stock number 5306013525049.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-352-5049.
-
MPN or Model
MS21250H07028
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.721 inches -
Fastener Length
2.491 inches -
Head Style
Double hexagon extended washer -
Head Height
0.435 inches -
Width Between Flats
0.5000 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
0.4375 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
23200 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
96906-ms21250h0728 government standard
More from these suppliers
- 5935-00-018-1150 MPN MS27292-4Electrical Connector Cover
- 5950-00-051-4532 MPN MS75008-45Radio Frequency Coil
- 5935-00-083-1029 MPN MS3106E36-5SElectrical Plug Connector
- 5950-00-086-2934 MPN MS16225-16Radio Frequency Coil
- 5930-00-108-7019 MPN MS35058-19Toggle Switch
- 5905-00-146-8157 MPN MS90537-38Film Fixed Resistor
- 5935-00-147-9552 MPN MS27508E16B26PAElectrical Receptacle Connector
- 5935-00-261-6878 MPN MS27508E16AC8PCElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-352-5049 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250H07028 | Military Standards |
MS21250H07028 | Military Standards |
MS21250H07028 | Military Standards |
MS21250H07028 | Military Standards |