NSN 5306-01-352-5050
Coaxial Connector
1.431 inches fastener length, double hexagon extended washer head style, 0.711 inches head height, width between flats: 0.8125 inches .
Manufacturer part number MS21250H12006 for national stock number 5306013525050.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-352-5050.
-
MPN or Model
MS21250H12006
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.492 inches -
Fastener Length
1.431 inches -
Head Style
Double hexagon extended washer -
Head Height
0.711 inches -
Width Between Flats
0.8125 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
0.178 inches -
Grip Diameter
0.7500 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
71100 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
96906-ms21250h12006 government standard
More from these suppliers
- 5935-00-127-1446 MPN MS16108/10-20Tip Jack
- 5935-00-194-8149 MPN MS17348R24N11PElectrical Receptacle Connector
- 5935-00-199-3337 MPN MS3106A20-23PElectrical Plug Connector
- 5940-00-204-8990 MPN MS35443-1Lug Terminal
- 5935-00-253-0141 MPN MS3119E12-10WConnector Adapter
- 5935-00-258-0027 MPN MS20026T15B18PElectrical Receptacle Connector
- 5975-00-263-1100 MPN MS39074-10Conduit Chase Nipple
- 5950-00-279-6539 MPN MS75085-3Radio Frequency Coil
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-352-5050 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250H12006 | Military Standards |
MS21250H12006 | Military Standards |
MS21250H12006 | Military Standards |
MS21250H12006 | Military Standards |