NSN 5306-01-353-2003
Wheel Bolt
1.531 inches fastener length, hexagon head style, between 0.740 inches and 0.752 inches head height, width between flats: between 0.265 inches and 0.295 inches .
Manufacturer part number MS21095-8012 for national stock number 5306013532003.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-353-2003.
-
MPN or Model
MS21095-8012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.781 inches -
Fastener Length
1.531 inches -
Head Style
Hexagon -
Head Height
Between 0.740 inches and 0.752 inches -
Width Between Flats
Between 0.265 inches and 0.295 inches -
Locking Feature
Patch threads or pellet threads or strip threads -
Thread Diameter
0.500 inches -
Grip Length
Between 0.740 inches and 0.750 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c bearing surface of head and 32.0 rockwell c bearing surface of head -
Material
Plastic polyamide locking featuresteel comp 431 fastener -
Material Specification
Mil-s-18732 military specification single material response fastener -
Surface Treatment
Passivate fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-005-8846 MPN MS3470L14-19PWElectrical Receptacle Connector
- 5935-00-031-4242 MPN MS27473T20B16PElectrical Plug Connector
- 5935-00-088-7947 MPN MS3119E12-3YConnector Adapter
- 5930-00-088-9327 MPN MS25253-4Sensitive Switch
- 5935-00-153-7455 MPN MS18168-2YElectrical Receptacle Connector
- 5935-00-173-4352 MPN MS27472E14B18PBElectrical Receptacle Connector
- 5935-00-174-0357 MPN MS27480T22C55PElectrical Plug Connector
- 5945-00-201-9456 MPN MS24143-D1Electromagnetic Relay
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-353-2003 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-8012 | Military Standards |