NSN 5306-01-357-1710
Coaxial Connector
Between 2.773 inches and 2.803 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number VS3318-5-36 for national stock number 5306013571710.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-357-1710.
-
MPN or Model
VS3318-5-36
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.538 inches -
Fastener Length
Between 2.773 inches and 2.803 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
0.383 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-352-2078 MPN VCL0008-8-21Close Tolerance Screw
- 5305-01-435-6614 MPN BACB30LU9-27Close Tolerance Screw
- 5306-00-466-0740 MPN VAL23611-5D016Close Tolerance Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-054-3419 MPN VCG0009L6-13Shear Bolt
- 5306-01-054-3421 MPN VCG0009L6-18Shear Bolt
- 5306-01-123-9781 MPN VEP220221-8F15Shear Bolt
- 5306-01-130-6562 MPN VCG0002-6-24Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-357-1710 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3318-5-36 | Alcoa Global Fasteners, Inc. |
X384-S-36 | Huck International, Inc. |
DF33004-5-36 | Huck International, Inc. |
VS3318-5-36 | Voi-shan/chatsworth |
DF33004-5-36 | Huck Intl Inc |
X384-S-36 | Huck Intl Inc |
AIC1654-5-36 | Sps Technologies, Llc |
SLB187-5-36 | Space-lok, Inc. |
03A099-5-36 | Northrop Grumman Systems Corporation |
SII1182-5-36 | Sonic Industries Inc. |
MB210-5-36 | Hi-shear Corporation |
PBF1421-5-36 | Sps Technologies, Llc |
VCG0016-5-36 | Valley-todeco, Inc. |
123710-5-36 | Sps Technologies, Llc |