NSN 5306-01-358-8399
Coaxial Connector
Between 1.771 inches and 1.801 inches fastener length, spline drive shear head head style, 0.257 inches head height, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number 84269-7-19D for national stock number 5306013588399.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-358-8399.
-
MPN or Model
84269-7-19D
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.599 inches -
Fastener Length
Between 1.771 inches and 1.801 inches -
Head Style
Spline drive shear head -
Head Height
0.257 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.111 inches first hole -
Head Minor Diameter
Between 0.671 inches and 0.703 inches -
Thread Diameter
0.437 inches -
Grip Length
1.187 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.641 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-047-9441 MPN BACB30LU4-7Close Tolerance Screw
- 5305-01-365-6317 MPN VCL0009-6-20Close Tolerance Screw
- 5305-01-413-9023 MPN VCL0009-7-36Close Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5305-01-500-8240 MPN 3M1170C3-5AClose Tolerance Screw
- 5306-00-060-7930 MPN VAL12001-4Machine Bolt
- 5306-00-294-9728 MPN VAL23033-8D46Shear Bolt
- 5306-00-926-5554 MPN 3M33-7-15Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-358-8399 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84269-7-19D | Sps Technologies, Llc |
VCJ0002-7-19D | Valley-todeco, Inc. |
AIC1237-7-19D | Sps Technologies, Llc |
PBF1542-7-19D | Sps Technologies, Llc |
3D0029-7-19D | Boeing Company, The |
1237-7-19D | Sps Technologies, Llc |