1-321-802-5889
Email Us

NSN 5306-01-359-2294

Close Tolerance Hex Head Bolt

About this product

Between 2.051 inches and 2.081 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .

Manufacturer part number S4928913-4-28 for national stock number 5306013592294.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-359-2294.

  • MPN or Model

    S4928913-4-28

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093490 - Bolt/nut/screw/clips/fastener/etc
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.316 inches
  • Fastener Length
    Between 2.051 inches and 2.081 inches
  • Head Style
    Dished hexagon
  • Head Height
    Between 0.125 inches and 0.140 inches
  • Width Between Flats
    Between 0.430 inches and 0.439 inches
  • Grip Diameter
    Between 0.2483 inches and 0.2492 inches
  • Shank Unthreaded Hole Diameter
    0.076 inches first hole and 0.086 inches first hole
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 1.740 inches and 1.760 inches
  • Thready Qty Per Inch (tpi)
    28
  • Min. Tensile Strength (psi)
    95000 pounds per square inch
  • Hardness Rating
    36.0 rockwell c and 40.0 rockwell c
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.939 inches first hole and 1.959 inches first hole
  • Surface Finish
    32.0 microinches first shoulder63.0 microinches bearing surface of head63.0 microinches grip32.0 microinches threads
  • Material
    Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150
  • Material Specification
    Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-8503 military specification 5th material response
  • Surface Treatment
    Chromium bearing surface of headcadmium sides of headchromium gripcadmium top of headcadmium threads
  • Surface Treatment Specification
    Dps.9.84, type 1, cage 88277 mfr ref single treatment response bearing surface of headdps.9.74, type 1, cage 88277 mfr ref single treatment response sides of headdps.9.84, type 1, cage 88277 mfr ref single treatment response gripdps9.74, type 1, cage 88277 mfr ref single treatment response top of headdps.9.74, type 1, cage 88277 mfr ref single treatment response threads
  • Thread Series Designator
    Unf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-359-2294 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306013592294

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
S4928913-4-28 Boeing Company, The
S4928913-4-28 Boeing Company, The
S4928913-4-28 Boeing Company, The
S4928913-4-28 Boeing Company, The
S4928913-4-28 Boeing Company, The
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.