NSN 5306-01-359-6905
Coaxial Connector
Between 0.968 inches and 1.015 inches fastener length, double hexagon head style, 0.187 inches head height, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number EWSBM26-5-10 for national stock number 5306013596905.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-359-6905.
-
MPN or Model
EWSBM26-5-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.359 inches -
Fastener Length
Between 0.968 inches and 1.015 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type 1, cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-146-0021 MPN 73573-95-24CSocket Head Cap Screw
- 5305-00-186-9221 MPN SFT22-4A30Close Tolerance Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-505-2986 MPN LS15234C3-19Close Tolerance Screw
- 5305-00-928-9646 MPN SFT22-4A20Machine Screw
- 5305-01-020-9617 MPN HT4025L3-11Close Tolerance Screw
- 5305-01-067-5838 MPN C7984-3-17Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-359-6905 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSBM26-5-10 | Sps Technologies, Llc |
EWSBM26-5-10 | Sps Technologies, Llc |