NSN 5306-01-360-4826
Coaxial Connector
Between 2.013 inches and 2.043 inches fastener length, dished hexagon head style, between 0.281 inches and 0.296 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number NAS6709U19 for national stock number 5306013604826.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-360-4826.
-
MPN or Model
NAS6709U19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.840 inches -
Fastener Length
Between 2.013 inches and 2.043 inches -
Head Style
Dished hexagon -
Head Height
Between 0.281 inches and 0.296 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6709 professional/industrial association standard
More from these suppliers
- 5905-00-432-0368 MPN RNR55H9761FSFilm Fixed Resistor
- 5935-00-454-6899 MPN NAS1650R22B55SNElectrical Receptacle Connector
- 5935-01-218-3818 MPN NAS1692G10T5P6Electrical Receptacle Connector
- 1680-01-525-5016 MPN NAS5312E3-6JSix Lobe Recess Scr
- 5305-00-018-7514 MPN NAS1220-5E10Machine Screw
- 5305-00-052-5690 MPN NAS1352-4H14Socket Head Cap Screw
- 5305-00-063-3840 MPN NAS1244-11Shoulder Screw
- 5305-00-067-3461 MPN NAS1352C4L412Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-360-4826 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6709U19 | National Aerospace Standards |
NAS6709U19 | National Aerospace Standards |