NSN 5306-01-360-9158
Close Tolerance Hex Head Bolt
Between 1.206 inches and 1.236 inches fastener length, spline extended washer head style, between 0.327 inches and 0.347 inches head height, extended washer diameter: between 0.691 inches and 0.701 inches .
Manufacturer part number A78325-6H-9 for national stock number 5306013609158.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-360-9158.
-
MPN or Model
A78325-6H-9
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.634 inches and 0.684 inches -
Fastener Length
Between 1.206 inches and 1.236 inches -
Head Style
Spline extended washer -
Head Height
Between 0.327 inches and 0.347 inches -
Extended Washer Diameter
Between 0.691 inches and 0.701 inches -
Extended Washer Thickness
Between 0.044 inches and 0.064 inches -
Hole Diameter
Between 0.230 inches and 0.270 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Head Minor Diameter
Between 0.448 inches and 0.453 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Hole Configuration Style
Spline -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-9453 MPN 106830-5D34Close Tolerance Screw
- 5305-00-143-1838 MPN 38031-5C10Socket Head Cap Screw
- 5305-00-851-6409 MPN NAS1203-18Close Tolerance Screw
- 5305-00-935-7579 MPN 3M50-4-19Shoulder Screw
- 5305-01-005-0465 MPN 38030-3F10CSocket Head Cap Screw
- 5305-01-013-9600 MPN 73991H-7D29Close Tolerance Screw
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-038-9556 MPN BACB30LH3-4Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-360-9158 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A78325-6H-9 | Sps Technologies, Llc |
A78325-6H-9 | Moog Inc. |