NSN 5306-01-361-7047
Coaxial Connector
2.393 inches fastener length, spline drive shear head head style, 0.322 inches head height, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number LD111-0021-0628 for national stock number 5306013617047.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-361-7047.
-
MPN or Model
LD111-0021-0628
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.643 inches -
Fastener Length
2.393 inches -
Head Style
Spline drive shear head -
Head Height
0.322 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Head Minor Diameter
Between 0.422 inches and 0.437 inches -
Thread Diameter
0.375 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Am 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-121-3680 MPN 36-33554Landing Gear Shaft
- 1560-00-386-7616 MPN 144-54071Aircraft Access Cover
- 1560-00-401-2644 MPN 285-130258-31Airfoil Rib
- 1560-00-482-3239 MPN 265-318065-2Aircraft Frame
- 1680-00-702-9548 MPN 5927-25Out Seat Back Cover
- 1560-00-960-0660 MPN 265-180071-1Flap Trailing Edge
- 1680-00-960-0771 MPN 265-522076-1Bell Crank
- 4920-01-164-4776 MPN R-TBD-564Aircraft Maintenance Fixture
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-361-7047 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0628 | Boeing Company, The |