NSN 5306-01-361-7924
Coaxial Connector
Between 3.026 inches and 3.056 inches fastener length, dished hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number NAS6712U32 for national stock number 5306013617924.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-361-7924.
-
MPN or Model
NAS6712U32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.016 inches and 1.066 inches -
Fastener Length
Between 3.026 inches and 3.056 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7485 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams7531 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-664-5697 MPN NAS1063A2-107DLTerminal Board Marker Strip
- 5305-00-003-9327 MPN NAS6003U18Machine Screw
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
- 5305-00-043-2677 MPN MS24694S94Machine Screw
- 5305-00-051-9135 MPN NASM51958Machine Screw
- 5305-00-052-5938 MPN MS35198-80Machine Screw
- 5305-00-068-0543 MPN MS24678-11CSocket Head Cap Screw
- 5305-00-143-3252 MPN NAS1352C5LN24Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-361-7924 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6712U32 | National Aerospace Standards |