NSN 5306-01-363-6121
Coaxial Connector
Between 5.447 inches and 5.451 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.985 inches and 1.000 inches .
Manufacturer part number 17P2C1385-1 for national stock number 5306013636121.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-363-6121.
-
MPN or Model
17P2C1385-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.590 inches -
Fastener Length
Between 5.447 inches and 5.451 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.985 inches and 1.000 inches -
Grip Diameter
Between 0.623 inches and 0.624 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.4375 inches -
Grip Length
Between 4.857 inches and 4.861 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
280000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.247 inches first hole and 5.251 inches first hole -
Color
Gray -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Dps9.28-1 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-046-2644 MPN 2444891Switch Adjust Plate
- 1560-00-121-0693 MPN 5114745Aircraft Floor
- 1560-00-123-1631 MPN 2106219Cowling Flap Plunger
- 1560-00-123-3192 MPN 2105291Window Upper Berth Glass
- 1560-00-123-6642 MPN 2117361Window Locking Bar
- 1560-00-182-4860 MPN 2116624Aircraft Structural Panel
- 1560-00-184-5375 MPN 3133007Aircraft Channel
- 1560-00-191-0246 MPN 5104130-1NAircraft Door
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-363-6121 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
17P2C1385-1 | Boeing Company, The |