NSN 5306-01-363-7001
Coaxial Connector
Between 4.025 inches and 4.035 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.985 inches and 1.000 inches .
Manufacturer part number 17P2C1374-501 for national stock number 5306013637001.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-363-7001.
-
MPN or Model
17P2C1374-501
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.595 inches -
Fastener Length
Between 4.025 inches and 4.035 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.985 inches and 1.000 inches -
Hole Diameter
Between 0.106 inches and 0.116 inches -
Grip Diameter
Between 0.6225 inches and 0.6235 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 3.430 inches and 3.440 inches -
Thready Qty Per Inch (tpi)
20 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.820 inches first hole and 3.830 inches first hole -
Color
Gray -
Material
Steel -
Material Specification
Dms-1935 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Dps9.71 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-043-0022 MPN 3825317-1Bracket Assy
- 1560-00-067-9800 MPN 3826166-1Aircraft Structural Component Support
- 1560-00-122-9592 MPN 5230835Pressure Fuel Servicing Adapter
- 1680-00-123-0231 MPN 1117110Control Column Cap
- 5985-00-123-6646 MPN 2117221Mast
- 1560-00-182-5082 MPN 5142362-1NCowling
- 1560-00-192-6226 MPN 1109592Nose Wheel Pad
- 1560-00-521-2043 MPN 5143436-19Engine Conduit Assy
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-363-7001 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
17P2C1374-501 | Boeing Company, The |