NSN 5306-01-365-8132
Coaxial Connector
Between 1.896 inches and 1.926 inches fastener length, spline extended washer head style, 0.505 inches head height, extended washer diameter: between 1.037 inches and 1.047 inches .
Manufacturer part number VCG0038-9-16 for national stock number 5306013658132.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-365-8132.
-
MPN or Model
VCG0038-9-16
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.911 inches -
Fastener Length
Between 1.896 inches and 1.926 inches -
Head Style
Spline extended washer -
Head Height
0.505 inches -
Extended Washer Diameter
Between 1.037 inches and 1.047 inches -
Extended Washer Thickness
0.081 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Head Minor Diameter
Between 0.610 inches and 0.625 inches -
Thread Diameter
0.562 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
18000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-105-1142 MPN ST3M733-3L3Close Tolerance Screw
- 5305-01-351-0805 MPN 03A161-3-15Close Tolerance Screw
- 5305-01-435-0460 MPN BACB30LU14-53XClose Tolerance Screw
- 5305-01-513-9648 MPN ST3M557-5-7Close Tolerance Screw
- 5306-00-291-5245 MPN ST3M453-5-8Close Tolerance Bolt
- 5306-00-357-1900 MPN VAL23029-5-28Close Tolerance Bolt
- 5306-00-911-4242 MPN 78-C-0581Shoulder Bolt
- 5306-01-234-1658 MPN BACB30MT7-17Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-365-8132 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0038-9-16 | Valley-todeco, Inc. |
AIC872-9-16 | Sps Technologies, Llc |
PBF15983-9-16 | Sps Technologies, Llc |
84268-9-16 | Sps Technologies, Llc |