NSN 5306-01-366-1130
Coaxial Connector
Centerdrill in point end at manufacturer's option on dash number 12 and 14 sizes.
Manufacturer part number 84268-14-56 for national stock number 5306013661130.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-366-1130.
-
MPN or Model
84268-14-56
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.317 inches -
Fastener Length
Between 4.802 inches and 4.832 inches -
Head Style
Spline extended washer -
Head Height
0.700 inches -
Extended Washer Diameter
Between 1.615 inches and 1.630 inches -
Extended Washer Thickness
0.126 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Head Minor Diameter
Between 0.923 inches and 0.938 inches -
Thread Diameter
0.875 inches -
Grip Length
3.500 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip32.0 microinches threads32.0 microinches fastener -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-571-8180 MPN 59572-5-6 Aircraft Index Pin
- 5305-00-008-3701 MPN NAS1122-9Close Tolerance Screw
- 5305-00-067-7811 MPN SFH22-6A18Machine Screw
- 5305-00-079-7414 MPN SFH22-4A9Machine Screw
- 5305-00-823-5807 MPN NAS1102-04-10Machine Screw
- 5305-01-004-9495 MPN 106752-02-109CMachine Screw
- 5305-01-032-5377 MPN 54268-5-16Shoulder Screw
- 5305-01-043-1859 MPN NAS1221-06V4Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-366-1130 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84268-14-56 | Sps Technologies, Llc |
80994-14-56 | Sps Technologies, Llc |
3447-14-56 | Alcoa Global Fasteners, Inc. |