NSN 5306-01-366-3500
Coaxial Connector
Between 1.496 inches and 2.466 inches fastener length, spline extended washer head style, 0.562 inches head height, extended washer diameter: between 1.153 inches and 1.163 inches .
Manufacturer part number 84268-10-24 for national stock number 5306013663500.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-366-3500.
-
MPN or Model
84268-10-24
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.981 inches -
Fastener Length
Between 1.496 inches and 2.466 inches -
Head Style
Spline extended washer -
Head Height
0.562 inches -
Extended Washer Diameter
Between 1.153 inches and 1.163 inches -
Extended Washer Thickness
0.090 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Head Minor Diameter
Between 0.673 inches and 0.688 inches -
Thread Diameter
0.625 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-217-2185 MPN BACB30LU8-8Close Tolerance Screw
- 5305-01-477-5607 MPN 3M1034C6-14-49Close Tolerance Screw
- 5306-00-469-3634 MPN C4356CR5-505Shoulder Bolt
- 5306-00-505-9803 MPN J646P20AMachine Bolt
- 5306-01-044-5188 MPN VAL23607-6D17XShoulder Bolt
- 5306-01-045-2435 MPN VAL23607-3-23Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-366-3500 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84268-10-24 | Sps Technologies, Llc |
VCG0038-10-24 | Valley-todeco, Inc. |
AIC872-10-24 | Sps Technologies, Llc |
PBF15983-10-24 | Sps Technologies, Llc |
3D0028-10-24 | Boeing Company, The |
3447-10-24 | Alcoa Global Fasteners, Inc. |