NSN 5306-01-368-8049
Coaxial Connector
Between 1.263 inches and 1.310 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 642AS1004-8 for national stock number 5306013688049.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-368-8049.
-
MPN or Model
642AS1004-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
Between 1.263 inches and 1.310 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c fastener and 52.0 rockwell c fastener -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 cl3 ty2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-123-3462 MPN 255AS214-1Safety Relief Valve
- 5950-00-155-4732 MPN 247ASC1977-001Power Transformer
- 5905-00-247-4792 MPN 371AS145-1Inductive Wire Wound Fixed Resistor
- 5905-01-013-4591 MPN 247ASC0509-001Thermal Resistor
- 5935-01-060-3777 MPN 642AS0758Electrical Receptacle Connector
- 5950-01-069-1849 MPN 642AS7935Power Transformer
- 5935-01-071-4407 MPN 642AS3106Bracket Test Connec
- 5905-01-090-9595 MPN 247AS-C0502-266Film Fixed Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-368-8049 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
642AS1004-8 | Sps Technologies, Llc |
123840-5-13 | Sps Technologies, Llc |
642AS1004-8 | Naval Air Systems Command |
642AS1004-8 | Hi-shear Corporation |
642AS1004-8 | Lisi Aerospace Canada Corp |