NSN 5306-01-369-0766
Wheel Bolt
Between 1.031 inches and 1.077 inches fastener length, hexagon head style, between 0.094 inches and 0.106 inches head height, width between flats: between 0.243 inches and 1.077 inches .
Manufacturer part number MS21095-1012 for national stock number 5306013690766.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-369-0766.
-
MPN or Model
MS21095-1012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.312 inches -
Fastener Length
Between 1.031 inches and 1.077 inches -
Head Style
Hexagon -
Head Height
Between 0.094 inches and 0.106 inches -
Width Between Flats
Between 0.243 inches and 1.077 inches -
Locking Feature
Strip threads -
Thread Diameter
0.138 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
125.0 microinches grip -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-007-9056 MPN MS14007Electrical Receptacle Connector
- 5935-00-081-4340 MPN MS24266R22B55SNXElectrical Plug Connector
- 5940-00-082-4833 MPN MS25036-2Stud Terminal
- 5935-00-090-8256 MPN MS27499E22B35PElectrical Receptacle Connector
- 5930-00-109-9818 MPN MS25089-1GPush Switch
- 5905-00-110-0992 MPN MS35044-94Composition Fixed Resistor
- 5940-00-113-8179 MPN MS20536-107Lug Terminal
- 5935-00-133-5323 MPN MS3114H12C10PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-369-0766 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-1012 | Military Standards |