NSN 5306-01-369-3327
Coaxial Connector
Between 0.370 inches and 0.400 inches fastener length, hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6203-1 for national stock number 5306013693327.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-369-3327.
-
MPN or Model
NAS6203-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.370 inches and 0.400 inches -
Head Style
Hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification 1st material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification 1st treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6203 professional/industrial association standard
More from these suppliers
- 5940-01-384-5279 MPN NAS1063F1-1Terminal Board Marker Strip
- 5305-00-003-1691 MPN MS24693-50BMachine Screw
- 5305-00-007-6179 MPN NAS1100E04-9Machine Screw
- 5305-00-008-5890 MPN NAS1102C08-14Machine Screw
- 5305-00-008-9113 MPN NAS1190E02T4LSocket Head Cap Screw
- 5305-00-052-9053 MPN MS24630-38Tapping Screw
- 5305-00-078-8708 MPN MS51045-18Setscrew
- 5305-00-115-6084 MPN NAS1351C06-6Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-369-3327 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6203-1 | National Aerospace Standards |