NSN 5306-01-369-3835
Coaxial Connector
2.251 inches fastener length, dished hexagon head style, 0.625 inches thread diameter, grip length: between 1.615 inches and 1.635 inches .
Manufacturer part number NAS6210-26D for national stock number 5306013693835.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-369-3835.
-
MPN or Model
NAS6210-26D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
Between 0.601 inches and 0.651 inches -
Fastener Length
2.251 inches -
Head Style
Dished hexagon -
Thread Diameter
0.625 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-351-3864 MPN NAS1063A15-10SCTerminal Board
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5935-01-577-3543 MPN MS27488-20Electrical Connector End Seal Plug
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5305-00-052-7391 MPN MS24627-1Tapping Screw
- 5305-00-058-5087 MPN NAS608-3H12Socket Head Cap Screw
- 5305-00-059-3670 MPN MS51958-74Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-369-3835 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6210-26D | National Aerospace Standards |