NSN 5306-01-369-3837
Coaxial Connector
Hexagon head style, between 0.109 inches and 0.141 inches head height, between 0.428 inches and 0.440 inches width between flats, thread diameter: 0.250 inches.
Manufacturer part number NAS464P4-76 for national stock number 5306013693837.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-369-3837.
-
MPN or Model
NAS464P4-76
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
Between 5.015 inches and 5.062 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Thread Diameter
0.250 inches -
Grip Length
5.093 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 or steel comp e4340 -
Surface Treatment
Cadmium grip and chromate grip -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-817-9981 MPN NAS714-15Electrical Receptacle Connector
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-007-2943 MPN NAS1100C06-9PMachine Screw
- 5305-00-008-5895 MPN NAS1102-06-14BMachine Screw
- 5305-00-059-8243 MPN MS35214-18Machine Screw
- 5305-00-071-1320 MPN MS51960-63Machine Screw
- 5305-00-071-2089 MPN MS51957-89Machine Screw
- 5305-00-145-0713 MPN MS16995-18BSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-369-3837 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P4-76 | National Aerospace Standards |