NSN 5306-01-371-2851
Coaxial Connector
Between 5.913 inches and 5.943 inches fastener length, spline extended washer head style, 0.450 inches head height, extended washer diameter: 0.812 inches .
Manufacturer part number MS21296-08080 for national stock number 5306013712851.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-371-2851.
-
MPN or Model
MS21296-08080
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.913 inches -
Fastener Length
Between 5.913 inches and 5.943 inches -
Head Style
Spline extended washer -
Head Height
0.450 inches -
Extended Washer Diameter
0.812 inches -
Extended Washer Thickness
Between 0.062 inches and 0.082 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Head Minor Diameter
Between 0.547 inches and 0.562 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 4.990 inches and 5.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
335000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-001-2819 MPN RNC70J9762FSFilm Fixed Resistor
- 5905-00-001-2920 MPN RBR55L49900FRNoninductive Wire Wound Fixed Resistor
- 5905-00-001-7174 MPN RV4NBYSJ255ANonprecision Nonwire Wound Variable Resistor
- 5905-00-006-5404 MPN RBR54L18700BMNoninductive Wire Wound Fixed Resistor
- 5935-00-008-2616 MPN M81511/23EB03S3Electrical Receptacle Connector
- 5905-00-012-4440 MPN MIL-R-39005/6Noninductive Wire Wound Fixed Resistor
- 4920-00-028-3597 MPN MILS7610BASICHydraulic System Components Test Stand
- 5905-00-031-3905 MPN RN70A6191FFilm Fixed Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-371-2851 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |
MS21296-08080 | Military Specifications |