NSN 5306-01-371-5679
Close Tolerance Hex Head Bolt
With retaining ring on shank.
Manufacturer part number MS27576-10-53 for national stock number 5306013715679.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-371-5679.
-
MPN or Model
MS27576-10-53
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.648 inches -
Fastener Length
Between 4.161 inches and 4.181 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.313 inches and 0.328 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6232 inches and 0.6241 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 3.312 inches and 3.328 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.051 inches first hole -
Surface Finish
63.0 microinches bearing surface of head63.0 microinches grip -
Material
Steel comp e4340 fastener or steel comp 4140 fastener or steel comp 8740 fastener or steel comp 4130 fastener or steel comp 6150 fastener -
Material Specification
Mil-s-5000 military specification 1st material response fastener or mil-s-5626 military specification 2nd material response fastener or mil-s-6049 military specification 3rd material response fastener or mil-s-6758 military specification 4th material response fastener or mil-s-8503 military specification 5th material response fastener -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-652-2533 MPN NAS1063A4-TB138RDTerminal Board Marker Strip
- 5305-00-008-9113 MPN NAS1190C02T4LSocket Head Cap Screw
- 5305-00-008-9114 MPN NAS1190C02T6LSocket Head Cap Screw
- 5305-00-057-0521 MPN MS51958-25Machine Screw
- 5305-00-058-9363 MPN MS51977-20Setscrew
- 5305-00-063-3503 MPN MS24693-S50Machine Screw
- 5305-00-067-3461 MPN NAS1352C4L412Socket Head Cap Screw
- 5305-00-068-5276 MPN MS16995-9Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-371-5679 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-10-53 | National Aerospace Standards |
MS27576-10-53 | Military Standards |