NSN 5306-01-371-7933
Wheel Bolt
5.250 inches fastener length, hexagon head style, between 0.302 inches and 0.323 inches head height, width between flats: between 0.736 inches and 0.750 inches .
Manufacturer part number 0.50013UNC2A5.25T2GB7SEC for national stock number 5306013717933.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-371-7933.
-
MPN or Model
0.50013UNC2A5.25T2GB7SEC
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.250 inches -
Fastener Length
5.250 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.736 inches and 0.750 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp 4140 and steel comp 4142 and steel comp 4145 -
Material Specification
Astm a193 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-446-3499 MPN CV41S4901-39PC433Safety Relief Valve
- 4820-00-473-4879 MPN 253-59-038PC421Angle Valve
- 5930-00-915-0861 MPN 2607126PC2Rotary Switch
- 4820-01-003-1056 MPN 2510073Screw Stem Shutoff Cock
- 5935-01-040-6244 MPN 2887824-2Electrical Receptacle Connector
- 5935-01-058-0803 MPN 6027456Electrical Receptacle Connector
- 4820-01-077-7300 MPN 803-2177934Valve Disk
- 5950-01-155-6236 MPN 3144325-25Radio Frequency Coil
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-371-7933 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
0.50013UNC2A5.25T2GB7SEC | Military Specifications |
0.50013UNC2A5.25T2GB7SEC | American National Standards |
803-5001003-S8X1-05 | Naval Sea Systems Command |