NSN 5306-01-372-4031
Coaxial Connector
Altered item made from nas6714u50:drilled shank threaded end to shank hole 0.257 to 0.267 inch: hole dia 0.110 to 0.140 inch.
Manufacturer part number 17G110017-45 for national stock number 5306013724031.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-372-4031.
-
MPN or Model
17G110017-45
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
30 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.180 inches -
Fastener Length
4.340 inches -
Head Style
Hexagon -
Head Height
Between 0.438 inches and 0.453 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8735 inches and 0.8740 inches -
End Application
C17a serd 110056 -
Thread Diameter
0.8750 inches -
Grip Length
2.880 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard 1st material response or ams 5737 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-037-0812 MPN 4113459Engine Control Pulley Assembly
- 1560-00-046-2986 MPN 3343859-504Exhaust Tubes Clamp
- 1560-00-180-9563 MPN 5141402-1Outer Wing Section
- 1560-00-182-6282 MPN 2209984Fuel Vent Line Seal
- 1560-00-194-5595 MPN 1117633Aircraft Structural Component Support
- 1560-00-348-7802 MPN 3483470Aircraft Window Panel
- 1560-00-573-6899 MPN 2443884Cockpit Flap Panel
- 1680-00-740-1588 MPN 3812330-501Limit Switch Cam
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-372-4031 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
17G110017-45 | Boeing Company, The |