NSN 5306-01-372-4034
Coaxial Connector
Altered item made from nas6706u46:used on adapter,pylon,instl-transp:drilled shank threaded end to shank hole 0.120 inch:hole dia 0.062 to 0.065 inch.
Manufacturer part number 17G110017-71 for national stock number 5306013724034.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-372-4034.
-
MPN or Model
17G110017-71
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
20 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.570 inches -
Fastener Length
3.450 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
End Application
C17a serd 110056 -
Thread Diameter
0.375 inches -
Grip Length
2.880 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard 1st material response or ams 5737 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-037-1150 MPN 5397847-9Exhaust Stack Assembly
- 1560-00-123-9894 MPN 5117199-2Cockpit Enclo Frame
- 1560-00-148-6427 MPN 5822194-705Fuselage Section
- 1560-00-185-5719 MPN 1117982-5Battery Tube Assembly
- 1680-00-204-5630 MPN C115177-1Firing Control Housing
- 1560-00-213-2934 MPN 5332579An Segment Assembly
- 1560-00-573-7001 MPN 5546241-75Tip Assy
- 1560-00-574-5273 MPN 4446741Hinged Enclo Handle
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-372-4034 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
17G110017-71 | Boeing Company, The |