NSN 5306-01-372-4710
Coaxial Connector
Between 1.722 inches and 1.752 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS6704DU21 for national stock number 5306013724710.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-372-4710.
-
MPN or Model
NAS6704DU21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.722 inches and 1.752 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2481 inches and 0.2487 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-499-2085 MPN NAS1643R10T5SNElectrical Plug Connector
- 5305-00-007-1564 MPN NAS1100E06-7PMachine Screw
- 5305-00-008-7855 MPN NAS1100C04-22PMachine Screw
- 5305-00-016-8175 MPN MS27039-5-27Machine Screw
- 5305-00-051-4484 MPN MS51973-9Setscrew
- 5305-00-057-0500 MPN MS51958-4Machine Screw
- 5305-00-088-9491 MPN AN565B428H7Setscrew
- 5305-00-102-3006 MPN NAS1218-08-10PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-372-4710 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704DU21 | National Aerospace Standards |