NSN 5306-01-373-3842
Coaxial Connector
Between 2.263 inches and 2.293 inches fastener length, dished hexagon head style, between 0.281 inches and 0.293 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number NAS6709DU23 for national stock number 5306013733842.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-373-3842.
-
MPN or Model
NAS6709DU23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.830 inches and 0.850 inches -
Fastener Length
Between 2.263 inches and 2.293 inches -
Head Style
Dished hexagon -
Head Height
Between 0.281 inches and 0.293 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-582-1161 MPN NAS305R22-0080Pu Control Assembly
- 5940-01-447-2283 MPN NAS1063B-9-14Terminal Board Marker Strip
- 5305-00-008-9114 MPN NAS1190C02T6LSocket Head Cap Screw
- 5305-00-058-5046 MPN MS24677-161Socket Head Cap Screw
- 5305-00-070-3116 MPN NAS1102C3-7Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-235-5766 MPN NAS1100-00-4Machine Screw
- 5305-00-579-3997 MPN NAS335CP13-5Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-373-3842 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6709DU23 | National Aerospace Standards |