NSN 5306-01-373-4829
Coaxial Connector
1.756 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number SS5025-07-017 for national stock number 5306013734829.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-373-4829.
-
MPN or Model
SS5025-07-017
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
1.756 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4340 -
Material Specification
Mil-s-8844 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification all treatment responses and nas 672 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-685-1889 MPN 314231Machine Screw
- 5305-00-802-6333 MPN 359486Machine Screw
- 5305-00-842-4603 MPN NAS1102-06-4Machine Screw
- 5305-01-058-7024 MPN NAS1101-4-26Machine Screw
- 5305-01-116-3085 MPN NAS1101-06H3Machine Screw
- 5305-01-327-6028 MPN AIC4038V3-8RMachine Screw
- 5305-01-328-9225 MPN AIC1625-3-5AClose Tolerance Screw
- 5305-01-417-3839 MPN TX1024D3-5-5AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-373-4829 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5025-07-017 | Sps Technologies, Llc |
SS5025-07-017 | Sps Technologies, Llc |
SS5025-07-017 | Sps Technologies, Llc |
SS5025-07-017 | Sikorsky Aircraft Corporation |