NSN 5306-01-375-6024
Coaxial Connector
0.838 inches fastener length, hexagon head style, 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS673V8 for national stock number 5306013756024.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-375-6024.
-
MPN or Model
NAS673V8
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.838 inches -
Head Style
Hexagon -
Head Height
0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-718-1721 MPN NAS707C3Stud Terminal
- 5940-01-559-2539 MPN MS27212-2-16Terminal Board
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-004-5183 MPN NAS1102-06-40Machine Screw
- 5305-00-008-5910 MPN NAS1189E3T10Socket Head Cap Screw
- 5305-00-059-3675 MPN MS51958-79Machine Screw
- 5305-00-059-7410 MPN MS35202-27Machine Screw
- 5305-00-182-9420 MPN NAS1635-3-9Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-375-6024 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS673V8 | National Aerospace Standards |
10116273 | Nimikkeistokeskus Ncb Finland |