NSN 5306-01-377-7278
Close Tolerance Hex Head Bolt
1.982 inches fastener length, spline extended washer head style, between 0.270 inches and 0.290 inches head height, extended washer diameter: between 0.470 inches and 0.480 inches .
Manufacturer part number S343-4-24 for national stock number 5306013777278.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-377-7278.
-
MPN or Model
S343-4-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.399 inches -
Fastener Length
1.982 inches -
Head Style
Spline extended washer -
Head Height
Between 0.270 inches and 0.290 inches -
Extended Washer Diameter
Between 0.470 inches and 0.480 inches -
Extended Washer Thickness
Between 0.162 inches and 0.182 inches -
Grip Diameter
Between 0.2480 inches and 0.2485 inches -
Head Minor Diameter
Between 0.297 inches and 0.312 inches -
Thread Diameter
0.250 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-435-3891 MPN BACB30LU7-43Close Tolerance Screw
- 5305-01-452-2163 MPN LD111-0046-2418Close Tolerance Screw
- 5305-01-648-2879 MPN NAS1124E9Machine Screw
- 5306-00-205-3521 MPN MS21250-05052Shear Bolt
- 5306-00-486-3025 MPN VAL23033Shear Bolt
- 5306-00-921-0857 MPN VFK100G-04032Shear Bolt
- 5306-01-054-3418 MPN VCG0009L6-12Shear Bolt
- 5306-01-059-3582 MPN VFK100G-03004Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-377-7278 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S343-4-24 | Huck International, Inc. |
VS3190-4-24 | Arconic Global Fasteners & Rings, |
ST3M753-4-24 | Boeing Company, The |
VFK600-4-24 | Valley-todeco, Inc. |
PBF 1267 | Sps Technologies, Llc |
11829-4-24 | Reid Products Inc. |
MB156-4-24 | Hi-shear Corporation |
MB156-4-24 | Lisi Aerospace Canada Corp |
AIC763-4-24 | Sps Technologies, Llc |
12897-4-24 | Sps Technologies, Llc |
VS3190-4-24 | Alcoa Global Fasteners, Inc. |
S343-4-24 | Huck Intl Inc |
10116274 | Nimikkeistokeskus Ncb Finland |