NSN 5306-01-379-0413
Coaxial Connector
Between 4.002 inches and 4.032 inches fastener length, spline extended washer head style, between 0.358 inches and 0.398 inches head height, extended washer diameter: between 0.922 inches and 0.932 inches .
Manufacturer part number ST3M753-8-52 for national stock number 5306013790413.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-379-0413.
-
MPN or Model
ST3M753-8-52
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.742 inches and 0.792 inches -
Fastener Length
Between 4.002 inches and 4.032 inches -
Head Style
Spline extended washer -
Head Height
Between 0.358 inches and 0.398 inches -
Extended Washer Diameter
Between 0.922 inches and 0.932 inches -
Extended Washer Thickness
Between 0.062 inches and 0.082 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Head Minor Diameter
Between 0.547 inches and 0.562 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 3.240 inches and 3.260 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-219-2962 MPN 11883-4L4Close Tolerance Screw
- 5305-01-251-0781 MPN 11873-3-4-4Close Tolerance Screw
- 5305-01-472-2052 MPN 11829-6-23Close Tolerance Screw
- 5305-01-478-8174 MPN 11827D4-12AClose Toleran Screw
- 5306-00-160-1545 MPN 11797A05U015Close Tolerance Bolt
- 5306-01-014-5125 MPN 11825-5-14Close Tolerance Bolt
- 5306-01-044-6541 MPN 11915-1317Shoulder Bolt
- 5306-01-130-9004 MPN 11875-12D36Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-379-0413 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M753-8-52 | Boeing Company, The |
11829-8-52 | Reid Products Inc. |