NSN 5306-01-379-1163
Coaxial Connector
Between 3.673 inches and 3.703 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6205-52 for national stock number 5306013791163.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-379-1163.
-
MPN or Model
NAS6205-52
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 3.673 inches and 3.703 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 3.240 inches and 3.260 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp e4340 and steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-547-3388 MPN NAS77A12-018PPre Flanged Bushing
- 5305-00-003-9211 MPN NAS1155V23Close Tolerance Screw
- 5305-00-008-5910 MPN NAS1189C3T10Socket Head Cap Screw
- 5305-00-052-9971 MPN MS51862-26Tapping Screw
- 5305-00-062-6031 MPN NAS560HF3-8Machine Screw
- 5305-00-067-3461 MPN NAS1352C4L412Socket Head Cap Screw
- 5305-00-274-1828 MPN NAS387-1032-100Machine Screw
- 5305-00-281-8527 MPN NASM525Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-379-1163 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-52 | National Aerospace Standards |