NSN 5306-01-380-0762
Coaxial Connector
7.402 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS6810HU104 for national stock number 5306013800762.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-380-0762.
-
MPN or Model
NAS6810HU104
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.902 inches -
Fastener Length
7.402 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 6.490 inches and 6.510 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or msa4928 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-008-2062 MPN NAS1509-21Close Tolerance Screw
- 5305-00-008-2104 MPN NAS1100C02-6PMachine Screw
- 5305-00-046-9796 MPN NAS514P1032-11PMachine Screw
- 5305-00-051-2354 MPN NAS387-832-24PMachine Screw
- 5305-00-057-0502 MPN MS51958-5Machine Screw
- 5305-00-082-4729 MPN MS21125-0310Close Tolerance Screw
- 5305-00-082-6667 MPN NAS1352C0C-12PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-380-0762 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6810HU104 | National Aerospace Standards |
Stock Check
- NE: 41
- NS: 2