NSN 5306-01-380-8029
Wheel Bolt
Between 1.922 inches and 1.968 inches fastener length, hexagon head style, between 0.453 inches and 0.485 inches head height, width between flats: between 1.253 inches and 1.441 inches .
Manufacturer part number AN14-16 for national stock number 5306013808029.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-380-8029.
-
MPN or Model
AN14-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.220 inches and 1.296 inches -
Fastener Length
Between 1.922 inches and 1.968 inches -
Head Style
Hexagon -
Head Height
Between 0.453 inches and 0.485 inches -
Width Between Flats
Between 1.253 inches and 1.441 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.875 inches -
Grip Length
Between 1.109 inches and 1.141 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.453 inches first hole and 0.485 inches first hole -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-149-3231 MPN AN3102A16-9SElectrical Receptacle Connector
- 5935-00-283-3729 MPN AN3101B12S3SElectrical Plug Connector
- 5935-00-500-8392 MPN AN3108B18-6PElectrical Plug Connector
- 5935-01-229-0130 MPN AN3101A16S1SCElectrical Plug Connector
- 5935-00-296-8004 MPN AN3116Electrical Plug Connector
- 5305-00-079-1159 MPN AN526DD832R8Machine Screw
- 5305-00-079-2556 MPN AN520C0R7Machine Screw
- 5305-00-115-3033 MPN AN565D820H40Setscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-380-8029 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN14-16 | Aeronautical Standards Group |
Stock Check
- NE: 293
- NS: 4