NSN 5306-01-381-8606
Close Tolerance Hex Head Bolt
Between 1.673 inches and 1.703 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number VCG0030-5-20 for national stock number 5306013818606.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-381-8606.
-
MPN or Model
VCG0030-5-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.673 inches and 1.703 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Head Minor Diameter
0.605 inches -
End Application
Pacer dawn -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-512-8319 MPN 3M1170C4-10AFClose Tolerance Screw
- 5305-01-626-0694 MPN ST3M557-7-27Close Tolerance Screw
- 5306-00-443-6799 MPN STSBG002A04U018Shear Bolt
- 5306-00-935-7528 MPN MS21250-05028Shear Bolt
- 5306-01-044-2969 MPN VAL23607-5-23Shoulder Bolt
- 5306-01-044-5194 MPN VAL23607-5D13Shoulder Bolt
- 5306-01-054-3419 MPN C7521L6-13Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-381-8606 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0030-5-20 | Valley-todeco, Inc. |
AIC596-5-20 | Sps Technologies, Llc |
PBF7521-5-20 | Sps Technologies, Llc |
VS3133-5-20 | Alcoa Global Fasteners, Inc. |
120978-5-20 | Sps Technologies, Llc |
H411-5-20 | Huck Intl Inc |
5306-002-5-20 | Aidc/aerospace Industrialdevelopment |
H411-5-20 | Huck International, Inc. |