NSN 5306-01-383-4450
Coaxial Connector
Between 1.485 inches and 1.515 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6205-17H for national stock number 5306013834450.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-383-4450.
-
MPN or Model
NAS6205-17H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.485 inches and 1.515 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
End Application
Pacer dawn -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-280-1082 MPN NAS1745-6Conductor Splice
- 5940-01-425-6516 MPN NAS1063A5-449Terminal Board Marker Strip
- 5305-00-008-5905 MPN NAS1189C02T5LSocket Head Cap Screw
- 5305-00-050-9215 MPN MS24667-52Socket Head Cap Screw
- 5305-00-051-2333 MPN NASM51958Machine Screw
- 5305-00-051-4508 MPN MS51974-27Setscrew
- 5305-00-052-7423 MPN MS35198-90Machine Screw
- 5305-00-057-2601 MPN MS51038-129Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-383-4450 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-17H | National Aerospace Standards |