NSN 5306-01-383-9940
Coaxial Connector
1.681 inches fastener length, double hexagon extended washer head style, 0.711 inches head height, width between flats: 0.812 inches .
Manufacturer part number 12387352-H12010 for national stock number 5306013839940.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-383-9940.
-
MPN or Model
12387352-H12010
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.036 inches -
Fastener Length
1.681 inches -
Head Style
Double hexagon extended washer -
Head Height
0.711 inches -
Width Between Flats
0.812 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
0.178 inches -
Hole Diameter
Between 0.045 inches and 0.060 inches -
Grip Diameter
Between 0.797 inches and 0.812 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 4140 military specification single material response -
Surface Treatment
Phosphate zinc -
Surface Treatment Specification
Mil-std-171 5.1.1 military standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-322-9451 MPN 8720783Inductive Wire Wound Fixed Resistor
- 4820-00-740-8795 MPN CPR109459Safety Relief Valve
- 4820-00-757-9930 MPN 8737734Gate Valve
- 5935-00-832-8018 MPN 11676532-3Electrical Connector Backshell
- 5935-01-011-1799 MPN 12293388-1Electrical Receptacle Connector
- 5935-01-083-9964 MPN 12273327-2431Electrical Plug Connector
- 5930-01-114-6345 MPN 12299709Sensitive Switch
- 5935-01-192-0627 MPN 12270720Electrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-383-9940 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12387352-H12010 | U S Army Tank Automotive Command |
Stock Check
- NS: 2045
- NE: 766