NSN 5306-01-384-3443
Close Tolerance Hex Head Bolt
Between 1.429 inches and 1.459 inches fastener length, hexagon head style, 0.764 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6607D12 for national stock number 5306013843443.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-384-3443.
-
MPN or Model
NAS6607D12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 1.429 inches and 1.459 inches -
Head Style
Hexagon -
Head Height
0.764 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
0.4360 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Hole Configuration Style
Hexagon corners -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 and steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-803Terminal Board Marker Strip
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-005-8210 MPN NAS1351C03-4Socket Head Cap Screw
- 5305-00-016-8173 MPN MS27039-5-25Machine Screw
- 5305-00-040-9354 MPN NAS514P428-18PMachine Screw
- 5305-00-051-4134 MPN MS24694C95Machine Screw
- 5305-00-052-6871 MPN MS24627-48Tapping Screw
- 5305-00-058-4011 MPN MS24694S105Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-384-3443 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6607D12 | National Aerospace Standards |
NAS6607D12 | National Aerospace Standards |
NAS6607D12 | National Aerospace Standards |
NAS6607D12 | National Aerospace Standards |
NAS6607D12 | National Aerospace Standards |
NAS6607D12 | National Aerospace Standards |
NAS6607D12 | National Aerospace Standards |
NAS6607D12 | National Aerospace Standards |
NAS6607D12 | National Aerospace Standards |