NSN 5306-01-385-9811
Close Tolerance Hex Head Bolt
Between 1.138 inches and 1.168 inches fastener length, flat countersunk head style, 0.3988 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number 03A160-4-12 for national stock number 5306013859811.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-385-9811.
-
MPN or Model
03A160-4-12
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.138 inches and 1.168 inches -
Head Style
Flat countersunk -
Head Diameter
0.3988 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2707 MPN LS15266V3-15Close Tolerance Screw
- 5305-01-016-2925 MPN BACB30LU3-1Close Tolerance Screw
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-579-8731 MPN ST3M652C6-22AClose Tolerance Screw
- 5305-01-604-8543 MPN 3M1277E4D6ALMachine Screw
- 5306-00-205-3521 MPN MS21250-05052Shear Bolt
- 5306-00-514-4840 MPN VFK100G-06058Shear Bolt
- 5306-00-582-9213 MPN 336C282P1Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-385-9811 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A160-4-12 | Northrop Grumman Systems Corporation |
SLB218-4-12 | Space-lok, Inc. |
03A160-4-12 | Northrop Grumman Systems Corporation |
HR241-4-12 | Hi-shear Corporation |
VCL0007-4-12 | Valley-todeco, Inc. |
AIC4409-4-12 | Sps Technologies, Llc |
SC5057-4-12 | Arconic Global Fasteners & Rings, |
PBF1418-4-12 | Sps Technologies, Llc |
123740-4-12 | Sps Technologies, Llc |