NSN 5306-01-385-9832
Close Tolerance Hex Head Bolt
Between 0.848 inches and 0.878 inches fastener length, flat countersunk head style, 0.3047 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number DF33006-3-8 for national stock number 5306013859832.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-385-9832.
-
MPN or Model
DF33006-3-8
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.848 inches and 0.878 inches -
Head Style
Flat countersunk -
Head Diameter
0.3047 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-4636 MPN BACB30LK3-4Close Tolerance Screw
- 5305-01-214-5064 MPN LD111-0044-0410Close Tolerance Screw
- 5306-00-281-7097 MPN VAL23033-6-9Shear Bolt
- 5306-01-142-9891 MPN VAL23607-4D6Shoulder Bolt
- 5306-01-206-2340 MPN VAL23033-6H14XShoulder Bolt
- 5306-01-206-7229 MPN BACB30LM3K4Shear Bolt
- 5306-01-211-7454 MPN VAL23033-5-82XShoulder Bolt
- 5306-01-302-2375 MPN VCB0008C8-16-90Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-385-9832 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
DF33006-3-8 | Huck International, Inc. |
03A160-3-8 | Northrop Grumman Systems Corporation |
DF33006-3-8 | Huck Intl Inc |
D33006-3-8 | Huck Intl Inc |
SLB218-3-8 | Space-lok, Inc. |
03A160-3-8 | Northrop Grumman Systems Corporation |
HR241-3-8 | Hi-shear Corporation |
VCL0007-3-8 | Valley-todeco, Inc. |
AIC4409-3-8 | Sps Technologies, Llc |
SC5057-3-8 | Arconic Global Fasteners & Rings, |
PBF1418-3-8 | Sps Technologies, Llc |
123740-3-8 | Sps Technologies, Llc |