NSN 5306-01-386-0770
Coaxial Connector
Shall be in accordance with all requirements as specified in national aerospace standard nas 6603 through 6620.
Manufacturer part number NAS6606H38 for national stock number 5306013860770.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-386-0770.
-
MPN or Model
NAS6606H38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
2.953 inches -
Head Style
Dished hexagon -
Head Height
0.188 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.374 inches and 0.375 inches -
Thread Diameter
0.375 inches -
Grip Length
2.375 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Hole Configuration Style
Hexagon corners -
Material
Steel comp e4340 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6606 professional/industrial association standard
More from these suppliers
- 5940-01-425-7398 MPN NAS1063C8-302Terminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-008-2062 MPN NAS1509-21Close Tolerance Screw
- 5305-00-057-0490 MPN MS24694-S4Machine Screw
- 5305-00-062-8457 MPN NAS1102-02-8Machine Screw
- 5305-00-087-2995 MPN MS24677-29Socket Head Cap Screw
- 5305-00-102-3007 MPN NAS1218-3-9PMachine Screw
- 5305-00-145-0747 MPN NAS1218-08-1Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-386-0770 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6606H38 | National Aerospace Standards |