NSN 5306-01-386-0990
Wheel Bolt
1.875 inches fastener length, double hexagon w/hole head style, 0.375 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS9210-25 for national stock number 5306013860990.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-386-0990.
-
MPN or Model
MS9210-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.905 inches -
Fastener Length
1.875 inches -
Head Style
Double hexagon w/hole -
Head Height
0.375 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
0.500 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.940 inches and 1.000 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
42.0 rockwell c and 46.0 rockwell c -
Material
Steel comp 601 -
Material Specification
Ams 6304 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-041-0772 MPN MS3154-12Electrical Connector Cable Clamp
- 5935-00-189-2530 MPN MS3470L14-19PElectrical Receptacle Connector
- 5935-00-241-7143 MPN MS3102A36-7PYElectrical Receptacle Connector
- 5905-00-254-2162 MPN RER65F6980MInductive Wire Wound Fixed Resistor
- 5935-00-258-4825 MPN MS3101A20-7PElectrical Plug Connector
- 5905-00-279-2672 MPN MS35043-205Composition Fixed Resistor
- 5935-00-356-4791 MPN MS3114E14-5PWElectrical Receptacle Connector
- 5935-00-419-5434 MPN MS3106K28-22SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-386-0990 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9210-25 | Military Standards |
Stock Check
- NS: 82
- NE: 2193